- Equipment World - http://www.equipmentworld.com -

308C CR Hydraulic Excavators

Posted By Equipment World Staff On November 12, 2007 @ 12:00 am In Boomerang | No Comments

Increased horsepower, better controllability, extended service intervals and a redesigned operator station increase your productivity and lower your operating costs.


 


 






















































































































































































































































































Engine

Units:  US 


Engine


Mitsubishi 4M40E1


Mitsubishi 4M40E1



Net Power


54 hp


41 kW



Gross power


55 hp


41 kW




Weights



Operating Weight


17730 lb


8040 kg




Dimensions



Max digging depth – standard stick


13.45 ft


4140 mm



Max reach ground level – standard stick


20.67 ft


6250 mm



Shipping length


19.1 ft


5830 mm



Center ground clearance


1.25 ft


384 mm



Track gauge


6.1 ft


1870 mm



Swing radius – rear


4.2 ft


1290 mm



Stick length – standard stick


5.5 ft


1665 mm



Stick length – long stick


7.3 ft


2110 mm



Max digging depth – long stick


15.4 ft


4690 mm



Max vertical dig depth – standard stick


11.8 ft


3600 mm



Max vertical dig depth – long stick


13.5 ft


4120 mm



Max reach ground level – long stick


22.2 ft


6770 mm



Max cutting height – standard stick


24.2 ft


7390 mm



Max cutting height – long stick


25.6 ft


7810 mm



Max dump height – standard stick


17.2 ft


5250 mm



Max dump height – long stick


18.6 ft


5670 mm




Engine Dimensions



Bore


3.7 in


95 mm



Stroke


4 in


100 mm



Displacement


173 in3


2.84 L




Travel System



Travel speed – high


3.3 mph


5.3 km/h




Hydraulic System



Operating pressures – equipment


3980 psi


274.6 bar



Operating pressure – travel


4550 psi


313.8 bar



Operating pressure – swing


3480 psi


196.1 bar



Digging forces – stick (standard)


7850 lb


35 kN



Digging force – stick (long)


6880 lb


31 kN



Digging force – bucket


9820 lb


44 kN



Digging force – Bucket


9820 lb


44 kN




Swing System



Machine swing speed


11.5 RPM


11.5 RPM




Service Refill Capacities



Cooling system


4 gal


15 L



Engine oil


2.6 gal


10 L



Fuel tank


30.4 gal


115 L



Hydraulic tank


14.5 gal


55 L



Hydraulic system


24.3 gal

.


Article printed from Equipment World: http://www.equipmentworld.com

URL to article: http://www.equipmentworld.com/c-cr-hydraulic-excavators/

Copyright © 2012 Equipment World -- Development. All rights reserved.